Loading... Please wait...
Categories
New Products
Our Newsletter
- Home
- Plastic Molding
- 1998 Engel ES 80/40 TL
- Home
- Plastic Molding
- IMM (Injection Molding Machines)
- 1998 Engel ES 80/40 TL
- Home
- Plastic Molding
- IMM (Injection Molding Machines)
- Engel
- 1998 Engel ES 80/40 TL
Product Description
| Specification | Description |
|---|---|
| Clamp Force: | 40 US Tons |
| Shot Size: | 1.2 Oz/22 mm |
| Shot size can be modified to: | .6Oz/18 mm or 1.6 Oz/25 mm |
| Platen Size: | 21.65" x 16.93" |
| Tie Bar Spacing: | NA |
| Min/Max Daylight: | 7.09" - 18.89" |
| Min Mold Ht: | 7.09" |
| Clamp Stroke: | 13.78" |
| Ejector Stroke: | 3.94" |
| Voltage: | 460 |
| Dimensions: | 121" x 53" x 75" |
| Weight: | 6,720lbs |
| Location: | East Coast |
| From clean room |
Equipped With:
CC-100 Control
ERSE 21 Side Entry Robot
Filtroil
Xaloy 102 Barrel
D2 Screw
Robot interface
Ceramic Heater Bands
Microplast/Microflow
PD Graphics & Reports
Automatic barrel start up
Host computer interface
For more information on this piece of equipment email us at usedinfo@pnaplastics.com or call our office at (630) 762-9998
